CrunchBang Linux Forums » Help & Support (Stable) » [Resolved] Audio not working on Acer Aspire one
Hi
I installed on another one of my acer aspire one's and the audio on this one is not working, I have tried everything and am at a lost..
CrunchBang 8.10.02
Linux-image-2.6.28sickboy-kuki_0.4_i386
Ok I have been trying to resolve this all day, and nothing.
Anyone have any help?
Did you tried this: https://help.ubuntu.com/community/AspireOne110L#Audio, mine is working very well.
Did you tried this: https://help.ubuntu.com/community/AspireOne110L#Audio, mine is working very well.
I looked it over, don't think it will help though.
I have it on another One and the audio works fine, but on my new one it does not work at all.
Did you have sound when you booted from either your livecd or livecd on USB? I am pretty sure I did. You could try rebooting the livecd image and just see if you get sound, or try selecting the original kernel from your grub menu. See if you can isolate it to the kernel.
When you bring up volume control does it list any audio device?
Also what is the output of lsmod and dmesg?
Did you have sound when you booted from either your livecd or livecd on USB? I am pretty sure I did. You could try rebooting the livecd image and just see if you get sound, or try selecting the original kernel from your grub menu. See if you can isolate it to the kernel.
When you bring up volume control does it list any audio device?
Also what is the output of lsmod and dmesg?
lsmod:
Module Size Used by
acpi_cpufreq 9932 1
cpufreq_userspace 2820 0
cpufreq_conservative 5576 0
cpufreq_stats 3716 0
cpufreq_powersave 1408 0
iptable_filter 2496 0
ip_tables 9168 1 iptable_filter
x_tables 11588 1 ip_tables
wlan_scan_sta 11328 1
ath_rate_sample 10944 1
snd_hda_intel 219664 0
snd_pcm_oss 32512 0
snd_mixer_oss 12544 1 snd_pcm_oss
snd_pcm 58052 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 2500 0
snd_seq_oss 25308 0
snd_seq_midi_event 5504 1 snd_seq_oss
ath_pci 205944 0
wlan 186036 4 wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 298208 3 ath_rate_sample,ath_pci
snd_seq 40896 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer 16840 2 snd_pcm,snd_seq
snd_seq_device 5708 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd 42808 8 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore 5576 1 snd
snd_page_alloc 7432 2 snd_hda_intel,snd_pcm
video 16656 0
backlight 3652 1 video
uhci_hcd 19212 0
r8169 27588 0
mii 4096 1 r8169dmesg:
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Linux version 2.6.28sickboy-kuki (root@Desktop) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #2 SMP PREEMPT Wed Feb 4 16:14:05 EST 2009 ()
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
[ 0.000000] BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
[ 0.000000] BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
[ 0.000000] BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
[ 0.000000] BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-d000
[ 0.000000] RAMDISK: 37c87000 - 37fefd76
[ 0.000000] Allocated new RAMDISK: 005be000 - 00926d76
[ 0.000000] Move RAMDISK from 0000000037c87000 - 0000000037fefd75 to 005be000 - 00926d75
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 INTEL )
[ 0.000000] ACPI: XSDT 3F4FE120, 0064 (r1 INTEL Napa 1 1000013)
[ 0.000000] ACPI: FACP 3F4FC000, 00F4 (r4 INTEL Napa 1 MSFT 1000013)
[ 0.000000] ACPI: DSDT 3F4F2000, 5DE4 (r1 INTEL Napa 1 MSFT 1000013)
[ 0.000000] ACPI: FACS 3F488000, 0040
[ 0.000000] ACPI: SSDT 3F4FD000, 04C4 (r2 PmRef CpuPm 3000 INTL 20051117)
[ 0.000000] ACPI: HPET 3F4FB000, 0038 (r1 INTEL Napa 1 MSFT 1000013)
[ 0.000000] ACPI: APIC 3F4FA000, 0068 (r2 INTEL Napa 1 MSFT 1000013)
[ 0.000000] ACPI: MCFG 3F4F9000, 003C (r1 INTEL Napa 1 MSFT 1000013)
[ 0.000000] ACPI: ASF! 3F4F8000, 00A5 (r32 INTEL Napa 1 MSFT 1000013)
[ 0.000000] ACPI: SLIC 3F4F1000, 0180 (r1 INTEL Napa 1 MSFT 1000013)
[ 0.000000] ACPI: BOOT 3F4F0000, 0028 (r1 INTEL Napa 1 MSFT 1000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00009000 - 0000ff00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005ba9fc] TEXT DATA BSS ==> [0000100000 - 00005ba9fc]
[ 0.000000] #4 [00005bb000 - 00005be000] INIT_PG_TABLE ==> [00005bb000 - 00005be000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [00005be000 - 0000926d76] NEW RAMDISK ==> [00005be000 - 0000926d76]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f500
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f376
[ 0.000000] 0: 0x0003f3bf -> 0x0003f46d
[ 0.000000] 0: 0x0003f4bf -> 0x0003f4f0
[ 0.000000] 0: 0x0003f4ff -> 0x0003f500
[ 0.000000] On node 0 totalpages: 259061
[ 0.000000] free_area_init_node: node 0, pgdat c04f7900, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 251 pages used for memmap
[ 0.000000] HighMem zone: 31581 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] PERCPU: Allocating 32768 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257034
[ 0.000000] Kernel command line: root=UUID=4253837c-4a6b-443c-80b0-34a23089fc41 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.950 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Memory: 1018496k/1037312k available (2716k kernel code, 17448k reserved, 1435k data, 280k init, 127328k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfff9f000 - 0xfffff000 ( 384 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000999] .init : 0xc0514000 - 0xc055a000 ( 280 kB)
[ 0.000999] .data : 0xc03a72a7 - 0xc050dfd4 (1435 kB)
[ 0.000999] .text : 0xc0100000 - 0xc03a72a7 (2716 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.90 BogoMIPS (lpj=1595950)
[ 0.000999] Security Framework initialized
[ 0.000999] Mount-cache hash table entries: 512
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.000999] CPU: L2 cache: 512K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 0
[ 0.000999] Intel machine check architecture supported.
[ 0.000999] Intel machine check reporting enabled on CPU#0.
[ 0.000999] using mwait in idle threads.
[ 0.000999] Checking 'hlt' instruction... OK.
[ 0.004380] ACPI: Core revision 20080926
[ 0.020427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030443] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.030995] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 3191.84 BogoMIPS (lpj=1595922)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.000999] CPU: L2 cache: 512K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 0
[ 0.000999] Intel machine check architecture supported.
[ 0.000999] Intel machine check reporting enabled on CPU#1.
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.102026] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.102053] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.103013] Brought up 2 CPUs
[ 0.103020] Total of 2 processors activated (6383.74 BogoMIPS).
[ 0.103095] CPU0 attaching sched-domain:
[ 0.103101] domain 0: span 0-1 level SIBLING
[ 0.103107] groups: 0 1
[ 0.103117] CPU1 attaching sched-domain:
[ 0.103122] domain 0: span 0-1 level SIBLING
[ 0.103127] groups: 1 0
[ 0.103246] net_namespace: 508 bytes
[ 0.104195] NET: Registered protocol family 16
[ 0.105047] ACPI: bus type pci registered
[ 0.105057] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.105064] PCI: MCFG area at e0000000 reserved in E820
[ 0.105068] PCI: Using MMCONFIG for extended config space
[ 0.105073] PCI: Using configuration type 1 for base access
[ 0.118023] ACPI: EC: Look up EC in DSDT
[ 0.125370] ACPI: BIOS _OSI(Linux) query ignored
[ 0.126677] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.627010] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 0.628940] ACPI: Interpreter enabled
[ 0.628948] ACPI: (supports S0 S3 S4 S5)
[ 0.628991] ACPI: Using IOAPIC for interrupt routing
[ 0.640365] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.640365] ACPI: EC: driver started in poll mode
[ 0.641357] ACPI: No dock devices found.
[ 0.641388] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.641452] pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff]
[ 0.641452] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
[ 0.641452] pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x4fffffff]
[ 0.641452] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff]
[ 0.641452] pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff]
[ 0.641452] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff]
[ 0.641452] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.641452] pci 0000:00:1b.0: PME# disabled
[ 0.641452] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.641452] pci 0000:00:1c.0: PME# disabled
[ 0.642055] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.642063] pci 0000:00:1c.1: PME# disabled
[ 0.642148] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.642157] pci 0000:00:1c.2: PME# disabled
[ 0.642238] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.642246] pci 0000:00:1c.3: PME# disabled
[ 0.642322] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
[ 0.642395] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
[ 0.642469] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
[ 0.642543] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
[ 0.642620] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff]
[ 0.642675] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.642684] pci 0000:00:1d.7: PME# disabled
[ 0.642869] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.642878] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.642939] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.642951] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.642963] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.642975] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.642987] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
[ 0.643026] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.643034] pci 0000:00:1f.2: PME# disabled
[ 0.643107] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
[ 0.643211] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
[ 0.643220] pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff]
[ 0.643232] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
[ 0.643306] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
[ 0.643339] pci 0000:02:00.0: reg 18 64bit mmio: [0x51010000-0x51010fff]
[ 0.643363] pci 0000:02:00.0: reg 20 64bit mmio: [0x51000000-0x5100ffff]
[ 0.643378] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 0.643398] pci 0000:02:00.0: supports D1 D2
[ 0.643403] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.643413] pci 0000:02:00.0: PME# disabled
[ 0.643502] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
[ 0.643511] pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff]
[ 0.643524] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
[ 0.643670] pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff]
[ 0.643893] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.643902] pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff]
[ 0.643914] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff]
[ 0.643984] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
[ 0.643993] pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff]
[ 0.644011] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff]
[ 0.644084] pci 0000:00:1e.0: transparent bridge
[ 0.644139] bus 00 -> node 0
[ 0.644155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.644889] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.645434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.645785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.646140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.646480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.654259] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.655136] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.655442] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.655739] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.656045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.656351] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.656648] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.656945] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.657423] ACPI: WMI: Mapper loaded
[ 0.658152] SCSI subsystem initialized
[ 0.658152] libata version 3.00 loaded.
[ 0.659023] usbcore: registered new interface driver usbfs
[ 0.659094] usbcore: registered new interface driver hub
[ 0.659094] usbcore: registered new device driver usb
[ 0.660058] PCI: Using ACPI for IRQ routing
[ 0.662016] Bluetooth: Core ver 2.13
[ 0.662047] NET: Registered protocol family 31
[ 0.662047] Bluetooth: HCI device and connection manager initialized
[ 0.662048] Bluetooth: HCI socket layer initialized
[ 0.664059] cfg80211: Using static regulatory domain info
[ 0.664059] cfg80211: Regulatory domain: US
[ 0.664059] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.664059] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.664059] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.664063] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.664069] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.664075] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.664081] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.664086] cfg80211: Calling CRDA for country: US
[ 0.664118] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.664118] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.667018] Switched to high resolution mode on CPU 0
[ 0.667112] Switched to high resolution mode on CPU 1
[ 0.668023] pnp: PnP ACPI init
[ 0.668062] ACPI: bus type pnp registered
[ 0.670452] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 7 (0x1000-0x1fff), disabling
[ 0.672554] pnp: PnP ACPI: found 9 devices
[ 0.672560] ACPI: ACPI bus type pnp unregistered
[ 0.672584] system 00:01: ioport range 0x200-0x20f has been reserved
[ 0.672592] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.672598] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.672605] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.672611] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.672618] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.672626] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.672633] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.672641] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.672648] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.672655] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.672662] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.672669] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.708678] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.708686] pci 0000:00:1c.0: IO window: 0x5000-0x5fff
[ 0.708698] pci 0000:00:1c.0: MEM window: 0x57300000-0x583fffff
[ 0.708707] pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff
[ 0.708722] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.708729] pci 0000:00:1c.1: IO window: 0x3000-0x4fff
[ 0.708739] pci 0000:00:1c.1: MEM window: 0x56300000-0x572fffff
[ 0.708748] pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x000000520fffff
[ 0.708761] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.708768] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.708778] pci 0000:00:1c.2: MEM window: 0x55200000-0x562fffff
[ 0.708786] pci 0000:00:1c.2: PREFETCH window: 0x00000052100000-0x000000530fffff
[ 0.708799] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 0.708806] pci 0000:00:1c.3: IO window: 0x1000-0x1fff
[ 0.708816] pci 0000:00:1c.3: MEM window: 0x54100000-0x551fffff
[ 0.708825] pci 0000:00:1c.3: PREFETCH window: 0x00000053100000-0x000000540fffff
[ 0.708837] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.708842] pci 0000:00:1e.0: IO window: disabled
[ 0.708851] pci 0000:00:1e.0: MEM window: disabled
[ 0.708858] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.708889] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.708900] pci 0000:00:1c.0: setting latency timer to 64
[ 0.708917] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.708925] pci 0000:00:1c.1: setting latency timer to 64
[ 0.708941] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.708950] pci 0000:00:1c.2: setting latency timer to 64
[ 0.708966] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.708975] pci 0000:00:1c.3: setting latency timer to 64
[ 0.708988] pci 0000:00:1e.0: setting latency timer to 64
[ 0.708996] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.709009] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.709015] bus: 01 index 0 io port: [0x5000-0x5fff]
[ 0.709020] bus: 01 index 1 mmio: [0x57300000-0x583fffff]
[ 0.709026] bus: 01 index 2 mmio: [0x50000000-0x50ffffff]
[ 0.709031] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.709036] bus: 02 index 0 io port: [0x3000-0x4fff]
[ 0.709041] bus: 02 index 1 mmio: [0x56300000-0x572fffff]
[ 0.709046] bus: 02 index 2 mmio: [0x51000000-0x520fffff]
[ 0.709051] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.709056] bus: 03 index 0 io port: [0x2000-0x2fff]
[ 0.709062] bus: 03 index 1 mmio: [0x55200000-0x562fffff]
[ 0.709067] bus: 03 index 2 mmio: [0x52100000-0x530fffff]
[ 0.709072] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.709077] bus: 04 index 0 io port: [0x1000-0x1fff]
[ 0.709082] bus: 04 index 1 mmio: [0x54100000-0x551fffff]
[ 0.709088] bus: 04 index 2 mmio: [0x53100000-0x540fffff]
[ 0.709093] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.709098] bus: 05 index 0 mmio: [0x0-0x0]
[ 0.709102] bus: 05 index 1 mmio: [0x0-0x0]
[ 0.709107] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.709111] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.709116] bus: 05 index 4 mmio: [0x000000-0xffffffff]
[ 0.709139] NET: Registered protocol family 2
[ 0.712132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.712683] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.713634] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.714136] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.714143] TCP reno registered
[ 0.715184] NET: Registered protocol family 1
[ 0.715430] checking if image is initramfs... it is
[ 1.195472] Freeing initrd memory: 3491k freed
[ 1.195908] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 1.195916] Simple Boot Flag at 0x44 set to 0x1
[ 1.198284] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.199074] highmem bounce pool size: 64 pages
[ 1.206575] fuse init (API version 7.10)
[ 1.206967] msgmni has been set to 1747
[ 1.207915] alg: No test for stdrng (krng)
[ 1.207942] io scheduler noop registered
[ 1.207949] io scheduler deadline registered (default)
[ 1.207977] pci 0000:00:02.0: Boot video device
[ 1.208625] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 1.208642] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012cc0), AE_ALREADY_EXISTS
[ 1.208658] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 1.210350] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 1.210365] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012cc0), AE_ALREADY_EXISTS
[ 1.212006] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.212070] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.212116] pcieport-driver 0000:00:1c.0: irq 319 for MSI/MSI-X
[ 1.212137] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.212236] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.212337] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.212521] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.212579] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.212621] pcieport-driver 0000:00:1c.1: irq 318 for MSI/MSI-X
[ 1.212643] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.212745] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.212836] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.213016] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.213076] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.213118] pcieport-driver 0000:00:1c.2: irq 317 for MSI/MSI-X
[ 1.213139] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.213231] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.213358] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.213554] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.213612] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.213653] pcieport-driver 0000:00:1c.3: irq 316 for MSI/MSI-X
[ 1.213674] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.213776] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.213885] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.216078] ACPI: AC Adapter [ACAD] (on-line)
[ 1.216369] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.216738] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.216745] ACPI: Power Button (FF) [PWRF]
[ 1.216952] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.216962] ACPI: Power Button (CM) [PWRB]
[ 1.217193] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.218300] ACPI: Lid Switch [LID0]
[ 1.218526] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.218534] ACPI: Sleep Button (CM) [SLPB]
[ 1.219775] ACPI: SSDT 3F380C90, 0239 (r2 PmRef Cpu0Ist 3000 INTL 20051117)
[ 1.220568] ACPI: SSDT 3F37FE10, 01C7 (r2 PmRef Cpu0Cst 3001 INTL 20051117)
[ 1.221541] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.221670] processor ACPI_CPU:00: registered as cooling_device0
[ 1.221684] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.222470] ACPI: SSDT 3F380F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117)
[ 1.223232] ACPI: SSDT 3F37EF10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117)
[ 1.224319] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.224444] processor ACPI_CPU:01: registered as cooling_device1
[ 1.224454] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.236102] Linux agpgart interface v0.103
[ 1.236146] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.236409] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.239192] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[ 1.239433] [drm] Initialized drm 1.1.0 20060810
[ 1.239499] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.239508] pci 0000:00:02.0: setting latency timer to 64
[ 1.239794] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 1.239861] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
[ 1.239868] intelfb: Version 0.9.6
[ 1.239933] intelfb: 00:02.0: Intel(R) 945GME, aperture size 256MB, stolen memory 7932kB
[ 1.246973] mtrr: no more MTRRs available
[ 1.246980] intelfb: unable to set MTRR
[ 1.247042] intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
[ 1.247053] intelfb: Video mode must be programmed at boot time.
[ 1.253670] brd: module loaded
[ 1.255612] loop: module loaded
[ 1.255870] Linux video capture interface: v2.00
[ 1.256170] usbcore: registered new interface driver uvcvideo
[ 1.256180] USB Video Class driver (v0.1.0)
[ 1.256277] Driver 'sd' needs updating - please use bus_type methods
[ 1.256371] Driver 'sr' needs updating - please use bus_type methods
[ 1.256600] ata_piix 0000:00:1f.2: version 2.12
[ 1.256630] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.256639] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.256707] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.256834] scsi0 : ata_piix
[ 1.257154] scsi1 : ata_piix
[ 1.259957] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 1.259964] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 1.457088] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.457096] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.463923] ata1.00: configured for UDMA/133
[ 1.615293] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 1.615783] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 1.615825] sd 0:0:0:0: [sda] Write Protect is off
[ 1.615832] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.615896] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.616056] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 1.616094] sd 0:0:0:0: [sda] Write Protect is off
[ 1.616101] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.616163] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.616170] sda: sda1 sda2 < sda5 >
[ 1.649493] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.649739] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.649920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.649968] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.650016] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.650024] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.650178] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.654108] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.654119] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.654149] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
[ 1.664021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.664264] usb usb1: configuration #1 chosen from 1 choice
[ 1.664407] hub 1-0:1.0: USB hub found
[ 1.664425] hub 1-0:1.0: 8 ports detected
[ 1.664977] Initializing USB Mass Storage driver...
[ 1.665103] usbcore: registered new interface driver usb-storage
[ 1.665121] USB Mass Storage support registered.
[ 1.665351] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.666014] i8042.c: Warning: Keylock active.
[ 1.674717] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.680324] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.680335] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.680341] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.680347] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.680353] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.680635] mice: PS/2 mouse device common for all mice
[ 1.681962] rtc_cmos 00:03: RTC can wake from S4
[ 1.682108] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.682154] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.682309] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.682541] Bluetooth: Virtual HCI driver ver 1.2
[ 1.682658] Bluetooth: HCI UART driver ver 2.2
[ 1.682666] Bluetooth: HCI H4 protocol initialized
[ 1.682673] Bluetooth: HCI BCSP protocol initialized
[ 1.682679] Bluetooth: HCILL protocol initialized
[ 1.682685] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[ 1.682783] usbcore: registered new interface driver bcm203x
[ 1.682795] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[ 1.682892] usbcore: registered new interface driver bpa10x
[ 1.682904] Bluetooth: BlueFRITZ! USB driver ver 1.2
[ 1.682999] usbcore: registered new interface driver bfusb
[ 1.683010] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 1.683117] usbcore: registered new interface driver btusb
[ 1.683129] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[ 1.683949] cpuidle: using governor ladder
[ 1.685355] cpuidle: using governor menu
[ 1.685510] Marking TSC unstable due to TSC halts in idle
[ 1.693223] usbcore: registered new interface driver usbhid
[ 1.693233] usbhid: v2.6:USB HID core driver
[ 1.693447] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 1.693462] Registering unionfs 1.4
[ 1.693467] unionfs: debugging is not enabled
[ 1.694983] TCP cubic registered
[ 1.694990] NET: Registered protocol family 17
[ 1.695013] Bluetooth: L2CAP ver 2.11
[ 1.695018] Bluetooth: L2CAP socket layer initialized
[ 1.695028] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.695033] Bluetooth: SCO socket layer initialized
[ 1.695127] Bluetooth: RFCOMM socket layer initialized
[ 1.695145] Bluetooth: RFCOMM TTY layer initialized
[ 1.695151] Bluetooth: RFCOMM ver 1.10
[ 1.695157] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.695163] Bluetooth: BNEP filters: protocol multicast
[ 1.695171] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.695347] Using IPI No-Shortcut mode
[ 1.696115] rtc_cmos 00:03: setting system clock to 2009-02-28 01:52:42 UTC (1235785962)
[ 1.696470] Freeing unused kernel memory: 280k freed
[ 1.696597] Write protecting the kernel text: 2720k
[ 1.696697] Write protecting the kernel read-only data: 1184k
[ 1.706569] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.052057] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 2.220516] usb 1-5: configuration #1 chosen from 1 choice
[ 2.220961] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[ 2.228653] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input5
[ 2.352454] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.352493] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.352533] r8169 0000:02:00.0: setting latency timer to 64
[ 2.352717] r8169 0000:02:00.0: irq 315 for MSI/MSI-X
[ 2.374166] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.374276] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.374295] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.374305] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.374401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.374447] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 2.374698] usb usb2: configuration #1 chosen from 1 choice
[ 2.374782] hub 2-0:1.0: USB hub found
[ 2.374802] hub 2-0:1.0: 2 ports detected
[ 2.375055] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.375071] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.375080] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.375158] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.375218] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
[ 2.375455] usb usb3: configuration #1 chosen from 1 choice
[ 2.375536] hub 3-0:1.0: USB hub found
[ 2.375555] hub 3-0:1.0: 2 ports detected
[ 2.375803] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.375819] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.375828] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.375892] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.375948] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[ 2.376171] usb usb4: configuration #1 chosen from 1 choice
[ 2.376281] hub 4-0:1.0: USB hub found
[ 2.376301] hub 4-0:1.0: 2 ports detected
[ 2.376555] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.376570] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.376579] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.376642] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.376699] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
[ 2.376923] usb usb5: configuration #1 chosen from 1 choice
[ 2.377006] hub 5-0:1.0: USB hub found
[ 2.377031] hub 5-0:1.0: 2 ports detected
[ 2.383601] eth0: RTL8102e at 0xf8066000, 00:23:8b:2d:96:09, XID 24a00000 IRQ 315
[ 2.681302] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.845833] usb 2-1: configuration #1 chosen from 1 choice
[ 2.867376] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6
[ 2.872917] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1/input0
[ 2.924423] PM: Starting manual resume from disk
[ 2.980155] kjournald starting. Commit interval 5 seconds
[ 2.980178] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.865797] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
[ 3.921621] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 8.536958] udevd version 124 started
[ 8.983488] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input8
[ 8.991169] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
[ 9.227926] ath_hal: module license 'Proprietary' taints kernel.
[ 9.233938] AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
[ 9.359711] intel_rng: FWH not detected
[ 9.394335] ath_pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.394379] ath_pci 0000:03:00.0: setting latency timer to 64
[ 9.766623] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.766734] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.137168] MadWifi: ath_attach: Switching rfkill capability off.
[ 10.196185] wifi0: Atheros AR2425 chip found (MAC 14.2, PHY SChip 7.0, Radio 10.2)
[ 10.281012] ath_pci: wifi0: Atheros 5424/2424: mem=0x55200000, irq=18
[ 10.801015] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x00fb0001
[ 11.660817] Adding 2988048k swap on /dev/sda5. Priority:-1 extents:1 across:2988048k
[ 12.353541] EXT3 FS on sda1, internal journal
[ 13.643705] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.773324] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 21.487498] mtrr: no more MTRRs available
[ 22.085596] r8169: eth0: link up
[ 22.085617] r8169: eth0: link up
[ 39.329307] lxsession[3630]: segfault at 0 ip b7ea9d88 sp bff7222c error 4 in libc-2.8.90.so[b7e33000+158000]When I bring up the volume control panel it shows:
HDA Intel (ALSA Mixer) and Realtek ALC268 (OSS MIXER)
I checked and when I run my live USB it does not have audio either.
Hmmm. Seems like the driver is loaded. I take it you have the volume controls up pretty high (master, pcm,front)?
Your lsmod output looks pretty much like mine.
The only real difference with your dmesg output than mine when it comes to sound is you have this line.
[ 10.801015] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x00fb0001
Did you ever have sound working on this system? Not sure if originally it was a Linpus system, or an XP one.
Do you have the following in /etc/modprobe.d/options ?
options snd-hda-intel model=acer-aspire
Hmmm. Seems like the driver is loaded. I take it you have the volume controls up pretty high (master, pcm,front)?
Your lsmod output looks pretty much like mine.
The only real difference with your dmesg output than mine when it comes to sound is you have this line.
[ 10.801015] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x00fb0001
Did you ever have sound working on this system? Not sure if originally it was a Linpus system, or an XP one.
Do you have the following in /etc/modprobe.d/options ?
options snd-hda-intel model=acer-aspire
OK My bad, in my hurry to try and fix this I over looked a small but imporant thing I did not hav PCM
I take it you mean you didn't have PCM turned up in the volume control? If so I am glad that is all it was.
hillsoft wrote:Hmmm. Seems like the driver is loaded. I take it you have the volume controls up pretty high (master, pcm,front)?
Your lsmod output looks pretty much like mine.
The only real difference with your dmesg output than mine when it comes to sound is you have this line.
[ 10.801015] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x00fb0001
Did you ever have sound working on this system? Not sure if originally it was a Linpus system, or an XP one.
Do you have the following in /etc/modprobe.d/options ?
options snd-hda-intel model=acer-aspire
OK My bad, in my hurry to try and fix this I over looked a small but imporant thing I did not have PCM visble and it was turned way down. lol this is a sign of too much missed sleep
Posts [ 11 ]
CrunchBang Linux Forums » Help & Support (Stable) » [Resolved] Audio not working on Acer Aspire one
Forums powered by PunBB. Hosted by Linode.
Copyright © CrunchBang Linux.
Proudly powered by Debian GNU/Linux.
Debian is a registered trademark of Software in the Public Interest, Inc.