Topic: conky covers other windows
hi there,
I've had my conky and desktop set up quite nicely and all worked fine. (thanks to all those conky config posts i was able to cherry pick my favorite things...)
but just recently, that is as of yesterday, on every system start my conky starts in a way that it is always on top covering every window beneath. after manually restarting conky it works fine most of the time, though!
my config:
# Use Xft?
use_xft yes
xftfont DejaVu Sans:size=8
xftalpha 0.8
text_buffer_size 2048
# Update interval in seconds
update_interval 1
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type override
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 180 0
#maximum_width 200
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_margin 5
# border width
border_width 1
# Default colors and also border colors
default_color white
#default_shade_color black
#default_outline_color white
own_window_colour white
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 35
gap_y 30
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2
# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2
# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer none
TEXT
SYSTEM ${hr 2}
${font StyleBats:size=16}A${font} CPU1: ${cpu cpu1}% ${alignr}${cpubar cpu1 8,60}
${font StyleBats:size=16}A${font} CPU2: ${cpu cpu2}% ${alignr}${cpubar cpu2 8,60}
${font StyleBats:size=16}g${font} RAM: $memperc% ${alignr}${membar 8,60}
DATE ${hr 2}
${alignc 35}${font Arial Black:size=26}${time %H:%M}${font}
${alignc}${time %A %d %Y}
HD ${hr 2}
${voffset 4}${font Pie charts for maps:size=14}7${font} ${voffset -5}Root:
${voffset 4}${fs_used /}/${fs_size /} ${alignr}${fs_bar 8,60 /}
NETWORK ${hr 2}
${if_existing /proc/net/route wlan0}
${voffset -6}${font PizzaDude Bullets:size=14}O${font} Up: ${upspeed wlan0} kb/s ${alignr}${upspeedgraph wlan0 8,60 789E2D A7CC5C}
${voffset 4}${font PizzaDude Bullets:size=14}U${font} Down: ${downspeed wlan0} kb/s ${alignr}${downspeedgraph wlan0 8,60 789E2D A7CC5C}
${voffset 4}${font PizzaDude Bullets:size=14}N${font} Upload: ${alignr}${totalup wlan0}
${voffset 4}${font PizzaDude Bullets:size=14}T${font} Download: ${alignr}${totaldown wlan0}
${voffset 4}${font PizzaDude Bullets:size=14}Z${font} Signal: ${wireless_link_qual wlan0}% ${alignr}${wireless_link_bar 8,60 wlan0}
${voffset 4}${font PizzaDude Bullets:size=14}b${font} Public Ip: ${alignr}${execi 1 ~/.scripts/ip.sh}
${else}${if_existing /proc/net/route eth0}
${voffset -6}${font PizzaDude Bullets:size=14}O${font} Up: ${upspeed eth0} kb/s ${alignr}${upspeedgraph eth0 8,60 789E2D A7CC5C}
${voffset 4}${font PizzaDude Bullets:size=14}U${font} Down: ${downspeed eth0} kb/s ${alignr}${downspeedgraph eth0 8,60 789E2D A7CC5C}
${voffset 4}${font PizzaDude Bullets:size=14}N${font} Upload: ${alignr}${totalup eth0}
${voffset 4}${font PizzaDude Bullets:size=14}T${font} Download: ${alignr}${totaldown eth0}
${voffset 4}${font PizzaDude Bullets:size=14}a${font} Local Ip: ${alignr}${addr eth0}
${voffset 4}${font PizzaDude Bullets:size=14}b${font} Public Ip: ${alignr}${execi 1 ~/.scripts/ip.sh}
${endif}${else}${if_existing /proc/net/route eth1}
${voffset -6}${font PizzaDude Bullets:size=14}O${font} Up: ${upspeed eth1} kb/s ${alignr}${upspeedgraph eth1 8,60 789E2D A7CC5C}
${voffset 4}${font PizzaDude Bullets:size=14}U${font} Down: ${downspeed eth1} kb/s ${alignr}${downspeedgraph eth1 8,60 789E2D A7CC5C}
${voffset 4}${font PizzaDude Bullets:size=14}N${font} Upload: ${alignr}${totalup eth1}
${voffset 4}${font PizzaDude Bullets:size=14}T${font} Download: ${alignr}${totaldown eth1}
${voffset 4}${font PizzaDude Bullets:size=14}a${font} Local Ip: ${alignr}${addr eth1}
${voffset 4}${font PizzaDude Bullets:size=14}b${font} Public Ip: ${alignr}${execi 1 ~/.scripts/ip.sh}
${endif}${else}
${font PizzaDude Bullets:size=14}4${font} Network Unavailable
${endif}
WEATHER ${hr 1}
${if_existing /proc/net/route wlan0}
${voffset -8}${alignr 56}${font ConkyWeather:style=Bold:size=40}${execi 600 conkyForecast --location=GMXX00510 --datatype=WF}${font}
${voffset -52}${font Weather:size=40}y${font} ${voffset -38}${font Trebuchet MS:size=26}${execi 600 conkyForecast --location=GMXX0051 --datatype=HT}${font}
${execpi 600 conkyForecast --location=GMXX0051 --template=/usr/share/conkyforecast/example/conkyForecast.template}
${endif}
Alt+F2$alignr Run Dialog
Alt+F3$alignr Alt Menu
Super+space$alignr Main Menu
Super+tab$alignr Client Menu
Super+t$alignr Terminal
Super+f$alignr File Manager
Super+m$alignr Media Player
Super+w$alignr Web Browser
Super+g$alignr Graphics Editor
Super+v$alignr Volume Control
Super+x$alignr Logoutat the same time i'm using a transparancy script for terminator posted somewhere here in the forum.
the whole issue started after i added "xpad" to the autostart.sh .... but the problem remains even after i've removed the line. even though i wouldn't have thought that simply adding another program to autostart could do that to you.
any ideas? thanks for the input.
