Note: this wiki is no longer maintained. If you have any questions related to this wiki, please post them on the CrunchBang forums.

Translations of this page?:

INSTALLATION copy a CrunchBang 10 or Crunchbang 11 ISO image to USB in Linux

:!: WARNING, the following instructions will destroy any existing data on your USB stick.

1. Insert your USB stick and learn how your USB stick is recognized by the system, enter the command:

sudo ls -l /dev/disk/by-id/*usb*

This should produce output along the lines of:

lrwxrwxrwx 1 root root  9 2010-03-15 22:54 /dev/disk/by-id/usb-_USB_DISK_2.0_077508380189-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 2010-03-15 22:54 /dev/disk/by-id/usb-_USB_DISK_2.0_077508380189-0:0-part1 -> ../../sdb1

2. Unmount the usb stick (At least one report of it having to be mounted), then use this command to write (as root) the image iso to your USB stick.
:!: Replace /dev/sdX with the actual hard disk device learned from the command above. In this example /dev/sdb NOT /dev/sdb1
:!: Replace the name of the iso image below by the actual name of the iso image you downloaded.

sudo dd if=/path/to/iso/crunchbang-10-20101205-openbox-i686.iso of=/dev/sdX bs=4M;sync

All being well, you should now have a bootable CrunchBang Statler USB stick.

HOWTO copy a CrunchBang ISO image to USB in Windows

:!: WARNING, the following instructions will destroy any existing data on your USB stick.

1. Download Win32DiskImage tool from Launchpad.

2. Extract the ZIP archive to the directory of your choice, preferably the directory the Statler ISO is stored.

3. Run the Win32ImageWriter program, and click the folder icon in the Image File section.

4. In the window to “Select a disk image,” navigate to the directory the ISO is in, and type “*.iso” without the quotes. The image should appear. Click the Save button.

5. Select your USB device from the list under “Device”.

6. Click the “Write” button to write the image to the USB drive, and proceed to the following instructions concerning the installer.

:!: In Windows 7 use XP compatibility mode to run Win32-image-writer.

 
statler_usb_installation.txt · Last modified: 2012/09/01 04:31 by parkerlreed
Except where otherwise noted, content on this wiki is licensed under the following license:CC Attribution-Share Alike 3.0 Unported

Powered by DokuWiki. Hosted by Linode.
Copyright © 2010 CrunchBang Linux.
Proudly powered by Debian GNU/Linux.
Debian is a registered trademark of Software in the Public Interest, Inc.